Daktronics ALL SPORT 5500 SERIES, Operation Manual, Page: 26 / 108

Segment Timer Operation
20
3 Segment Timer Operation
Sport Insert: LL-2475 (Code 100 is for the dedicated Segment Timer)
The Sport Insert drawing is located in Appendix B . The Quick Reference is located in
Appendix D .
Reference Drawings:
Insert, Segment Timer ......................................................................................... DWG-129357
Refer to Section 2: Basic Operation (p� 4) for information on how to start up the
console and use the sport insert.
If an insert is lost or damaged, a copy of the insert drawing can be used until a
replacement arrives.
If the code number for a scoreboard is unknown, refer to
Appendix C . If the scoreboard
model number is unknown, refer to the documentation provided with the scoreboard.
Segment Timer Overview
The segment timer is a multi-function timing system and has multiple purposes. Operation
of the segment timer is determined by 99 segments of pre-programmed length. The
segment timer will count down starting at the segment number that is set as First
Segment . When the first segment is completed, the timer will count the preset Interval
Time and move on to the next segment. The timer will continue counting segments until
the segment number that is set as Last Segment is complete. It then will reset to the
segment saved as the First Segment and will either begin counting down or wait for the
<START> key to be pressed depending on the <AUTO STOP> setting. Refer to Auto Stop (p�
23) to set the segment-stopping feature.
The First Segment and Last Segment values can be used to set up specific practice
sessions. For example, the practice session for one sport could be programmed for 5
minute segments on segments 1-10 while another might use 10 minute segments on 11-
20. Set the First Segment and Last Segment values to the desired segment numbers for
the session and the console will count down each of the segments in order. It may also
be set to either stop on the last segment or loop back to the first segment again based
on the <AUTO STOP> setting.
The segment values will be saved when the console is turned off and will be the same
values regardless of the sport that was used to access the segment timer.
Accessing Segment Timer
Turn on the console. Enter the sport code used for the scoreboard in use and press
<ENTER> . A list of sport codes can be found in Appendix C .
The segment timer program is accessed through the main menu of each individual sport.