Daitsu FDLA-09, Installation, Operation & Service Manual

Page: 136 / 322

Page 24 of 77
SK2019 FCSD(H)-V/P-ECM-001
Operating Limits
Power supplies
Volt Phase Hz
230 1 50
220 1 60
Water circuit
Minimum entering water temperature +2 °C
Maximum entering water temperature +80 °C
Water side recommended maximum pressure 1600 kPa
Before Installation
•
The installation site must be established by the system designer or other qualified professional, taking account of the
technical requisites and current standards and regulations.
•
Cassette fan coil units must be installed by qualified personnel only.
•
Cassette fan coil units are designed for installation in a false ceiling, for intake of fresh air from outside and for diverting a
small part of the treated air into a neighboring room.
•
They must be installed in such a way as to enable treated air to circulate throughout the room and allow the minimum
distances required for technical maintenance operations.
•
It is advisable to place the unit close to the installation site without removing it from packaging.
•
Do not put heavy tools or weights on packaging.
•
Upon receipt, the unit and the packaging must be checked for damage sustained in transit and if necessary, a damage
claim must be filed with the shipping company.
•
Check immediately for installation accessories inside the packaging.
•
Do not lift unit by the condensate drain discharge pipe or by the water connections or front panel; lift the unit using four
mounting brackets. (Figure B.4.1)
•
Check and note the unit serial number.
Figure B.4.1
Brackets