Daitsu FDLA-09, Installation, Operation & Service Manual

Page: 159 / 322

Page 47 of 77
SK2019 FCSD(H)-V/P-ECM-001
Fan Coil Unit ON/OFF
There are 3 ways to turn the system on or off:
a) By the ON/OFF button on the remote handset or wired wall pad.
b) By the programmable timer on the handset or wired wall pad.
c) By the manual control button on fan coil unit.
Auto Restart
The system uses a non-volatile memory to save the present operation parameters when the system is turned off
or in case of system failure or cessation of power supply.
The restored parameter data-set depends on the type of user interface.
a)
Handset only user interface:
When the power ON signal is received by the fan coil unit and no wired wall-pad is installed, the Mode, Fan Speed,
Set temperature and Louver setting will be the same as the handset setting before the last power OFF.
b)
Wall-pad only OR wall-pad and handset user interface:
When the power ON signal is received by the fan coil unit and a wired wall-pad is installed, the Mode, Fan Speed,
Set temperature, Louver setting and Timer ON/OFF weekly program will be the same as the wall pad setting
before the last power OFF.