Daitsu FDLA-09, Installation, Operation & Service Manual

Page: 212 / 322

Page 22 of 59
SK2015 SWC ‐ V ‐ EC ‐ 001
4. Unit Configuration:
On board DIP switches of DIPB are used for the below configurations.
SW1 PR ‐ O contact setting
0 Economy contact
1 Window contact
SW2 System setting
0 2 ‐ pipes system
1 4 ‐ pipes system
SW4 Preheat setting
1 28°C
0 36°C
5. Motorized Fan Speed Settings for Different Models:
Unit Model
Speed (RPM)
S3 SW5 SW6
Low Medium High
FMCD ‐ 04 500 600 700 0 0 0
FMCD ‐ 06 600 700 900 0 1 0
FMCD ‐ 12 600 700 950 0 0 1
FMCD ‐ 15 700 800 1100 0 1 1
FMCD ‐ 18 900 1100 1300 1 0 0
FMCD ‐ 20 800 900 1100 1 0 1
FMCD ‐ 24
900 1100 1200
1 1 0
FMCD ‐ 30 900 1200 1350 1 1 1
Default RPM 900 1200 1350 1 1 1
6. Mode configuration:
DIPA ‐ S1 Model
SW7 SW8 Model setting
0 0 Cool ‐ Heat
0 1 Cool ‐ Heat + booster heater
1 0 Cooling only
1 1 Cool + primary heater
7. Air Conditioner ON/OFF
There are 3 ways to turn the system on or off:
a) By the ON/OFF button on the handset or wired wall pad.
b) By the programmable timer on the handset or wired wall pad.
c) By the manual control button on the air conditioner.
8. Power On Setting
a) Handset only user interface: When the power ON signal is received by the air conditioner, the Mode, Fan
Speed, Setting temperature and Swing setting will be the same as the handset setting before the last power
OFF.
b) Wall ‐ pad only OR wall ‐ pad and handset user interface: When the power ON signal is received by the air
conditioner, the Mode, Fan Speed, Setting temperature, Swing setting and Timer ON/OFF weekly program
will be the same as the wall pad setting before the last power OFF.