7
2.5 Installing the S.I.T.E. NVM stick, input/output card
and transmission module (optional)
2.5.2 Installing the input/output card (with power off)
1.
Position the input/output card on the
guide rails.
2.
Slide the input/output card to the top
until it is locked into position.
INSTALLATIO
N
MODE
Input/output card
Guide rails
2.5.1 Installing the S.I.T.E. NVM stick (with power off)
2.5.3 Installing the transmission module (with power off)
2.
Clip the transmission
module on to the top
part of the control
panel.
Transmission
module
1.
Insert the SIM card into its compartment following the
direction indicated below the module.
GSM
/GPR
S
IMPORTANT: the transmission module is only compatible
with mini SIM cards.
If using an input/output card and a transmission module, the input/output card must be installed first.
Insert the S.I.T.E. stick in the
appropriate compartment
making sure it is the right
way round.
The S.I.T.E. Module allows:
• saving all the parameters and personalised vocal messages and
loading this information into the Control Panel without the need
to reprogram the system.
• the transfer of the personalized vocal messages of the Control
Panel into a separate transmitter.
If the S.I.T.E. module is virgin and the power station is already
configured, the parameter setting and the programming
information is transferred into the S.I.T.E. module.
If the Control Panel is virgin and S.I.T.E. module is full, the data
stored in the S.I.T.E. module is transferred into the Control Panel.
If the Control Panel is configured and S.I.T.E. module is also full,
and the 2 sets of data are different the system announces an
anomaly, and start-up is delayed until the S.I.T.E. module
becomes compatible by updating itself with the data from the
Control Panel. The assumption is that the Control Panel data is
correct.
CAUTION: the transfer time of the data can be long.
S.I.T.E. module
compartment