24
IMPORTANT: all disarm or arm commands can only be accessed via a code.
• To personalise a button so that it arms groups 1 to 8
, enter:
...
Example: to personalise the
button to arm groups 5 and 6:
button to be
personalised
group(s) 1 to 8
• To personalise a button to disarm groups 1 to 8, enter:
...
Example: to personalise the
button to disarm groups 7 and 8:
buttonto be
personalised
group(s) 1 to 8
Personalising a command button to arm or disarm groups 1 to 8
Delayed sounding
To
modify delayed sounding
, enter:
Factory-set sounding: 0 s, immediate
“bip + value entered”
from 0 to 60 s
Activation of the built-in siren upon intrusion
To
modify siren triggering
, enter:
Factory: enabled
“bip + value entered”
0: disabled
1: enabled
Manager reset
When an intrusion is confirmed, activating the manager reset parameter blocks system rearming.
Only the installer can unblock the system using the general reset authorisation command on the control panel keypad.
To unblock the system, enter:
To activate this parameter, enter:
Factory: disabled
0: disabled
1: enabled
installer code
Allocation of a detector programmed for recognition
The allocation of a detector programmed for recognition can be modified using the control panel keypad during product
recognition programming:
• groups 1 to 8 (according to the type of control panel),
• type of triggering (immediate, time-delayed or combined).
To modify a detector’s allocation, enter:
...
group(s)
1 to 8
programmed
detector n°
0: immediate
1: time-delayed
2: combined