26
Uninhibitable detector
If an exit is still open when the system is armed or a detector abnormally and repeatedly triggers, the control panel
automatically inhibits the detector concerned.
To delete this automatic inhibition, enter:
Factory: inhibitable
Behaviour of system components in relation to the value of parameter 26 (detection of communication network cut)
programmed
detector n°
“bip, detector X,
0 or 1”
0: inhibitable
1: uninhibitable
Type of command indications
To modify the type of indication, enter:
Factory: vocal
“Protection active” indication
The control panel indicates that the system is armed by issuing a series of 4 beeps and the message “Protection active”.
The user has the entry time delay to disarm the system before the alarms are triggered.
To modify this indication, enter:
Factory: enabled
0: disabled indication
1: vocal indication
IMPORTANT: whatever the type of indication chosen, the speech synthesis
system is temporarily reactivated to indicate possible alarms or faults.
0: disabled
1: enabled
Media fault indications
If the PSTN or GSM network is cut off, the control panel can trigger an alarm and a call via the back-up media. The system’s
response depends on the duration of the cut (more than 1 or 15 min).
Factory: events log alarm memori vocal memorisation
0: events log alarm memori vocal indication
1: events log alarm memori vocal indi fault message transmission if back-up media present
2: events log alarm memori vocal indi fault message transmission if back-up media present
+ start of alarm confirmation du
- if the system is totally armed and the PSTN is cut off > 1 min
fi
15 s triggering
- if the system is totally armed and the PSTN is cut off > 15 min or GSM is cut off
fi
90 s triggering
3: events log alarm memori vocal indi fault message transmission if back-up media p
- if PSTN cut off > 1 min
fi
15 s triggering
- if PSTN cut off > 15 min or GSM cut off
fi
90 s triggering
Control panel and control panel-dialler
Stand-alone dialler
Internal and external siren
0
events log alarm memorisation
+ vocal indication
0
no response
0
no response
in the event of a fault
and whatever the value
of parameter 26
1
if back-up media is present,
transmission of stand-alone dialler
media loss and restoral alarms only
1
2
1
events log alarm memorisation
+ vocal indi fault message transmission
if back-up media present
0
1
no response
transmission of system media
loss and restoral alarms
0
1
2
no response
loud sounding
if totally armed
loud sounding
24/24
2
events log alarm memorisation
+ vocal indi fault message transmission
if back-up media present
+ if system is totally armed:
if PSTN cut > 1 min
if PSTN cut or GSM
interference > 15 min
15 s triggering
90 s triggering
3
events log alarm memorisation
+ vocal indi fault message transmission
if back-up media present
+ whatever the system status:
if PSTN cut > 1 min
if PSTN cut or GSM
interference > 15 min
15 s triggering
90 s triggering