23
• Access restricted to certain groups
Example: to
restrict user code 1
to
Group 1
, enter:
In this case, only the
Disarmed
or
Armed Group 1
button can be accessed via user code 1.
• Combined restricted access to certain command buttons and certain groups
...
...
command button/s
group 1 to 8 buttons
(according to type of control panel)
group 1 to 8 buttons
(according to type of control
panel)
master code
user code
user code
from 1 to 32
(chosen user code)
Group 1
button
master code
user code
user code
repeated
from 1 to 32
(chosen user code)
Disabling or authorising a user code
A user code can be authorised or disabled in the 3 operating modes.
A programmed user code is automatically authorised.
To
disable
or
authorise
a user code, enter:
Examples:
• To
disable user code 1
, enter
• To
authorise user code 1
, enter:
master code
from 1 to 32
(chosen user code)
0: unauthorised
1: authorised
Personalising a command button
The
4 command buttons
on the control panel can be
personalised
to adapt the commands to the user’s needs (see table
below). Furthermore, this personalisation allows the user to select the type of access required to these commands (direct or
via a code).
To personalise a button, enter:
Personalised commands
button to be
personalised
command number
(see table
on next page)
type of access:
0: direct access
1: code-based
Example: to personalise the
buttons as an “Alert” with code-based access, enter:
IMPORTANT
• In installation mode, the keypad commands can be accessed
directly.
• All disarming and arming commands as well as the system status
command can only be accessed via a code.
Command description Command n°
Disarm (1) 21
Alert 22
Arm (1) 23
Silent alarm 24
Partially arm 1 (1) 25
Partially arm 2 (1) 27
Fire alarm 32
Arm presence 33
Silent command 36
Stop indications (1) (2) 37
Chime 38
Audible signal 42
No command 44
Command description Command n°
Off light 52
On light 54
Light toggle switch 56
Light timer 58
Off relay 1 62
On relay 1 64
Relay 1 toggle switch 66
Relay 1 timer 68
Off relay 2 72
On relay 2 74
Relay 2 toggle switch 76
Relay 2 timer 78
Off relay 3 82
Command description Command n°
On relay 3 84
Relay 3 toggle switch 86
Relay 3 timer 88
Off relay 4 92
On relay 4 94
Relay 4 toggle switch 96
Relay 4 timer 98
Off relay control panel 1 112
On relay control panel 1 114
Off relay control panel 2 122
On relay control panel 2 124
System status (1) 129
(1) Command with code access only.
(2) Used to stop indications concerning a technical alarm, an alert or a tamper alarm without changing the system status.
Important: telephone transmissions are not interrupted.