13
“bip, detector 1,
group 2,
immediate”
)
)
)
)
)
10 s max.
Example:
programming 1st door/widow detector, allocated to
group 2
and set for
immediate triggering
. The control panel
automatically allocates n° 1 to the first detector programmed.
“detector X”
“group?”
“time delay ?”
IMPORTANT: the control panel issues three short beeps to indicate a programming error. When this happens, perform
recognition programming again from the start.
then
Detector recognition programming involves selecting:
• a protection group from 1 to 8 (according to the type
of control panel),
• the type of triggering (immediate, time-delayed or
combined).
Press
*
then
#
on
the control panel
keypad
Press and hold the
“test”
button until the control
panel responds
Select a
group from 1 to 8*
(see table). Press the control
panel keypad to make the
selection.
Choose the type of triggering:
0: immediate • 1: time-delayed
2: combined
Press the control panel keypad to
make the selection
The control panel issues a
voice message to confirm
detector recognition
programming.
Control panel reference
Number of groups
Number of detectors
SH320AU
2
20
SH340AU
4
40
SH380AU
8
80
then
to
to
)
)
)
)
)
)
)
)
)
)
10 s max.
or
“detector X”
“group?”
“time delay ?”
“bip, detector X,
group Y, immediate
(or time-delayed
or combined)”
For recognition programming to work, the keypad must be in installation mode.
On power-up, the keypad is in user mode. To put it in installation mode, use the keypad to enter:
then
3.3 Programming the keypads to be recognised by the control panel
IMPORTANT: the control panel issues 3 short beeps to indicate a programming error. When this happens, perform recognition
programming again from the start.
• With a vocal keypad with tag reader SH640AX:
master code (factory: 0000)
installer code (factory: 1111)
Press
*
then
#
on the control
panel keypad
Press and hold
the
“Off”
button
until the control
panel responds
The control
panel issues a
voice message
to confirm
keypad
recognition
programming
The control panel
waits to know the
infrared detector
group (from 1 to 8
according to the
type of control
panel).
Press the
control panel keypad
to select the group.
The control panel waits to
know the chosen triggering
type for the infrared detector:
0: immediate,
1: time-delayed,
2: combined.
Press the control panel
keypad to make the
selection
The control
panel issues a
voice message
to confirm
infrared
detector
recognition
programming
)
)
)
)
)
10 s max.
puis
to
to
“bip, remote control
unit X, bip, detector X”
“bip, remote control
unit X, bip,
detector X, group Y
(immediate, time-
delayed or combined)
“group?”
“time delay?”
The keypad
issues a long
beep to
confirm
recognition
programming
“bip”