43
Commands for personalisation
Enter:
...
button to be
personalised
command
n°
access type:
• 0: direct access
• 1: access via code
IMPORTANT: all disarm or arm commands can only be accessed via a code.
• To personalise a button so that it arms groups 1 to 8
, enter:
...
button to be
personalised
group(s) 1 to 8
• To personalise a button to disarm groups 1 to 8
, enter:
...
button to be
personalised
group(s) 1 to 8
Personalising a command button to arm or disarm groups 1 to 8
Summary of commands
Command description
Parameter-setting sequence
Page
Operating mode check
# 4 ##
16
Radio link check
# 5 ##
32
Programmed product programming check
# 11 ##
14
IMPORTANT
• In installation mode, the keypad commands
can be accessed directly.
• All Disarm or Arm commands as well as the
System status command are accessed via a code.
(1) Command with code access only.
(2) Used to stop indications concerning a technical alarm, an alert or a tamper alarm without changing the system status.
Important: telephone transmissions are not interrupted.
Command description Command n°
Disarm (1) 21
Alert 22
Arm (1) 23
Silent alarm 24
Partially arm 1 (1) 25
Partially arm 2 (1) 27
Fire alarm 32
Arm presence 33
Silent command 36
Stop indications (1) (2) 37
Chime 38
Audible signal 42
No command 44
Command description Command n°
Off light 52
On light 54
Light toggle switch 56
Light timer 58
Off relay 1 62
On relay 1 64
Relay 1 toggle switch 66
Relay 1 timer 68
Off relay 2 72
On relay 2 74
Relay 2 toggle switch 76
Relay 2 timer 78
Off relay 3 82
Command description Command n°
On relay 3 84
Relay 3 toggle switch 86
Relay 3 timer 88
Off relay 4 92
On relay 4 94
Relay 4 toggle switch 96
Relay 4 timer 98
Off relay control panel 1 112
On relay control panel 1 114
Off relay control panel 2 122
On relay control panel 2 124
System status (1) 129