18
5.5.2 Time
Enter:
Example:
To programme 11:07 AM, enter:
To check the time, enter
“bip + time
announced”
“bip, 11:07”
“bip, 11:07”
hours
minutes
5.5 Setting the date and time parameters
5.5.1 Date
The events memorised by the control panel are time and date-stamped. If an alarm is triggered or a fault occurs, this
facilitates diagnosis.
To programme the date, enter:
Example:
To programme the 13
th
April 2012, enter:
To check the date, enter:
day
month
year
(for 2012, enter 12)
IMPORTANT
• The date and time must be
reprogrammed if the power
supply is disconnected.
• The switch between summer
and winter time is automatic.
“bip, 13/4/2012”
“bip + date
announced”
“bip, 13/4/2012”
Example:
To replace the factory installer code “1111” with the new code “5678”, proceed as follows:
“beeep”
5.4 Modifying the remote monitoring centre code (if transmission module installed)
• Modifying the remote monitoring centre code
To modify the remote monitoring centre code, proceed as follows:
Factory: 2222
old remote monitoring
centre code
new remote monitoring
centre code
new remote monitoring
centre code
“beeep”