Daikin VRV III REYQ8PY1, Service Manual

Page: 206 / 452

Si37-701 Field Setting
Test Operation 195
The numbers in the "No." column represent the number of times to press the
SET (BS2) button.
*1: Number of connected indoor units
Used to make setting of the number of indoor units connected to an outdoor
unit.
*2: Number of connected BS units
Used to make setting of the number of BS units connected to an outdoor
unit.
*3: Number of outdoor units
Used to make setting of the number of outdoor units connected to DIII-NET
that is one of the communication lines.
*4: Number of BS units
Used to make setting of the number of BS units connected to DIII-NET that is
one of the communication lines.
*5: Number of terminal units
Used to make setting of the number of indoor units connected to DIII-NET
that is one of the communication lines.
(Only available for VRV indoor units)
No. Setting item
LED display
Data display
H1P H2P H3P H4P H5P H6P H7P
0 Various settings
9 7 7 7 7 7 7
Lower 4 digits
1 C/H unified address
9 7 7 7 7 7 8
Lower 6 digits
2 Low noise/demand address
9 7 7 7 7 8 7
3 Not used
9 7 7 7 7 8 8
4 Airnet address
9 7 7 7 8 7 7
5
Number of connected indoor units
*1
9 7 7 7 8 7 8
6 Number of connected BS units *2
9 7 7 7 8 8 7
7
Number of connected zone units
(Fixed to "0")
9 7 7 7 8 8 8
8 Number of outdoor units *3
9 7 7 8 7 7 7
9
Number of BS units *4
9 7 7 8 7 7 8
Lower 4 digits:
upper
10 Number of BS units *4
9 7 7 8 7 8 7
Lower 4 digits:
lower
11 Number of zone units
9 7 7 8 7 8 8
Lower 6 digits
12 Number of terminal units *5
9 7 7 8 8 7 7
Lower 4 digits:
upper
13 Number of terminal units *5
9 7 7 8 8 7 8
Lower 4 digits:
lower
14
Contents of malfunction (the
latest)
9 7 7 8 8 8 7
Malfunction
code table
Refer page
226.
15
Contents of malfunction
(1 cycle before)
9 7 7 8 8 8 8
16
Contents of malfunction
(2 cycle before)
9 7 8 7 7 7 7
20 Contents of retry (the latest)
9 7 8 7 8 7 7
21 Contents of retry (1 cycle before)
9 7 8 7 8 7 8
22 Contents of retry (2 cycle before)
9 7 8 7 8 8 7
25
Number of multi connection
outdoor units
9 7 8 8 7 7 8
Lower 6 digits
c. Monitor mode
<Selection of setting item>
<Confirmation on setting contents>
To enter the monitor mode, push the
MODE (BS1) button when in
“Setting mode 1”.
Push the SET (BS2) button and set
the LED display to a setting item.
Push the RETURN (BS3) button to
display different data of set items.
Push the RETURN (BS3) button and
switches to the initial status of
“Monitor mode”.
∗
Push the MODE (BS1) button and
returns to “Setting mode 1”.
(V2765)