SiME281906E
Names and Functions
Part 3 Remote Controller
28
Mode Access Operation
On power-up, the message
Checking the connection. Please stand by.
will be displayed on
the remote controller screen. Then that message will disappear and the basic screen will be
displayed. To access a mode from the basic screen, refer to the figure below.
When any of the operation buttons is pressed, the backlight will come on and remains lit for
about 30 seconds. Be sure to press a button while the backlight is on (this does not apply to the
On/Off
button.)
Basic screen
Main Menu screen
Service Settings screen
Maintenance Menu screen
Basic Screen
• Operation mode changeover
• Temperature setting
• Airflow rate
• Airflow direction
• Menu display
• Confirmation of each setting
• On
• Off
• Cancel
• Operation lamp
Main Menu
• Airflow direction
• Quick start
• Ventilation
• Energy saving options
• Schedule
• Filter auto clean
• Maintenance information
• Configuration
• Current settings
• Clock & calendar
• Language
Service Settings Menu
• Test operation
• Maintenance Contract
• Field settings
• Min setpoints differential
• Group address
• Indoor unit AirNet address
• Outdoor unit AirNet address
• Error history
• Indoor unit status
• Outdoor unit status
• Forced fan ON
• Switch main sub controller
• Filter indicator
Maintenance Menu
• Model name
• Operation hours
• Indoor unit status
• Outdoor unit status
• Forced defrost
• Error display
• Swap unit No.
• Addressed sensor value
Press
the
Menu/Enter
button once.
Press the
Cancel
button once.
Press the
Cancel
button
for 4 seconds or more.
Press the
Cancel
button once.
Press the
Cancel
button
for 4 seconds or more.
Press the
Cancel
button once.