Daikin REYQ72-432XAYCU Service Manual Download Page 198

Page: 198 / 482

Field Settings for Indoor Unit

SiUS371901EB

191

Part 5 Field Settings and Test Operation

Sub-menu screen

SW 00

– 01

SW 00

– 01

Set

Cancel

Text mode

Icon mode

Press

button, to scroll to the desired

Second Code No., and then press

button.

Sub-menu screen

SW 00

– 01

SW 00

Set

Cancel

– 01

Text mode

Icon mode

Press

button, select “Set” or “

”, and

then press

button to save the setting and

return to the previous screen.
If the setting is not changed, select “Cancel” or
“

”.

Sub-menu screen

Mode 20
Unit 00

Enter

Return

Text mode

Icon mode

Press

button, move to “Return” or

“

”, and then press

button to return to the

installer menu.
* If the setting has been changed, the screen

may return to the home screen without
returning to the installer menu.

CAUTION

•

settings. For more information, see the installation manual of the optional accessory.

•

of the indoor unit.

• Field settings that are not available for a connected indoor unit are not displayed.
•

For details about the specific field settings of each type of indoor unit, see the installation manual

Field setting default values are different depending on the indoor unit model.

The connection of optional accessories to the indoor unit might cause changes to some field

NOTICE

•

See the manual of the optional accessory.

•

unit.

Installation of optional accessories on the indoor unit may require changes to field settings.

For field setting details related to the indoor unit, see installation manual shipped with the indoor

Summary of Contents for REYQ72-432XAYCU



































































































































































































































































































































































































































































































Search results

Summary of Contents for REYQ72-432XAYCU

Reviews:

Related manuals for REYQ72-432XAYCU

Brands by name

Popular brands

Daikin REYQ72-432XAYCU, Service Manual

Search results

Summary of Contents for REYQ72-432XAYCU

Reviews:

Related manuals for REYQ72-432XAYCU

Brands by name

Popular brands