Daikin ARK25BVMB, Service Manual

Page: 84 / 201

SiBE04-302
Instruction (In case of FTK(X)S 25/35 BVMB)
System Configuration 75
2.8 HOME LEAVE Operation
16
HOME LEAVE Operation
HOME LEAVE operation is a function which allows you to
record your preferred temperature and air flow rate settings.
■
To start HOME LEAVE
operation
1. Press “HOME LEAVE button” .
• The HOME LEAVE lamp lights up.
■
To cancel HOME LEAVE
operation
2. Press “HOME LEAVE button” again.
• The HOME LEAVE lamp goes off.
Before using HOME LEAVE operation.
■ ■ ■ ■
To set the temperature and air flow rate for HOME LEAVE operation
When using HOME LEAVE operation for the first time, please set the temperature and air flow rate
for HOME LEAVE operation. Record your preferred temperature and air flow rate.
1. Press “HOME LEAVE button”. Make sure “ ”is displayed in the remote control-
ler display.
2. Adjust the set temperature with “ ” or “ ” as you like.
3. Adjust the air flow rate with “FAN” setting button as you like.
Home leave operation will run with these settings the next time you use the unit. To change
the recorded information, repeat steps 1 – 3.
C
TEMP
ON/OFF
POWERFUL
HOME LEAVE
MODE
TIMER
FAN SWING
SILENT SENSOR
ON CANCEL
OFF
1, 2
ON
OFF
Initial setting Selectable range
temperature Air flow rate temperature Air flow rate
Cooling 25
°
C AUTO 18-32
°
C 5 step, AUTO and SILENT
Heating 25
°
C AUTO 10-30
°
C 5 step, AUTO and SILENT