1
General safety precautions
Installation and operating instructions
4
Daikin/ROTEX A2 F
Oil condensing boiler A2 F
008.1546499_02 – 04/2018 – EN
1
General safety precautions
1.1
Particular safety instructions
WARNING
Heating devices that have not been set
up and installed correctly can impair
the function of the heating device and/
or cause serious or fatal injuries to the
user.
▪ Work on the device (such as set-up,
servicing, connection and initial start-
up) must only be carried out by per-
sons who are authorised who are
authorised and who have success-
fully completed
qualifying technical
or vocational training
and who
have taken part in advanced training
sessions recognised by the relevant
responsible authorities for the spe-
cific activity. These include, in partic-
ular,
certified heating engineers,
qualified electricians and HVAC
specialists
, who, because of their
professional training
and their
ex-
pert knowledge,
have experience in
the professional installation and
maintenance of heating systems,
gas installations and hot water tanks.
WARNING
Disregarding the following safety in-
structions may result in serious phys-
ical injury or death.
▪ This device must only be used by
children
aged 8 and above and by
persons with restricted physical,
sensory or mental capabilities or with
a lack of experience and knowledge,
if they are under supervision or if
they have been instructed in the safe
use of the equipment and under-
stand the dangers arising therefrom.
Children
must not play with the
device. Cleaning and
user mainten-
ance
must not be carried out by
children
without supervision.
▪ Make up the power supply in accord-
ance with IEC 60335-1, via a separ-
ator device which exhibits contact
separation in all poles with a contact
opening distance that provide full
disconnection in accordance with
overvoltage category III.
▪ All the electrical work must only be
carried out by electrically qualified
experts and with consideration of the
local and national regulations, and
the instructions in this manual.
Check that a suitable electrical cir-
cuit is being used.
Inadequate capacity of the power cir-
cuit or improperly executed connec-
tions can cause electrocution or fire.
▪ The customer must install a pressure
relief device with rated over-pressure
less than 0.6 MPa (6 bar) for con-
necting a hot water storage tank.
The connected drain line must have
a continuous gradient and a free out-
let in a frost-free environment
(see
Chap. 4.4
).
▪ Water may drip out of the drain line
of the pressure relief device. The
drain opening must be left free to at-
mosphere.
▪ The pressure relief device must be
operated regularly in order to re-
move scale deposits and to make
sure it is not blocked.
▪ All work on oil-carrying parts must
only be carried out by heating oil-re-
lated qualified experts and with con-
sideration of local and national regu-
lations, and the instructions in this
manual.
▪ Improperly performed work on oil or
flue gas-carrying lines can endanger
life and health and hinder the opera-
tion of the heating device.