D-Link xStack Reference Manual Download Page 266

Page: 266 / 1284

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide

261

all 0 0 0 0 0 0 0 0

1 0 0 0 0 0 0 0 0

2 0 0 0 0 0 0 0 0

CFM TX Statistics

----------------------------------------------------------

Port AllPkt CCM LBR LBM LTR LTM

----- -------- -------- -------- --------- ------ -------

all 0 0 0 0 0 0

1 0 0 0 0 0 0

2 0 0 0 0 0 0

DGS-3620-28SC:admin#

16-26

clear cfm pkt_cnt

Description

This command is used to clear the CFM packet’s RX/TX counters.

Format

clear cfm pkt_cnt {[ports <portlist> {[rx | tx]} | [rx | tx] | ccm]}

Parameters

ports

- (Optional) Specify the port counters to clear. If not specified, all ports will be cleared.

<portlist>

- Enter a list of ports.

- (Optional) Clear the RX counter. If not specified, both the RX and TX counters will be

cleared.

- (Optional) Clear the TX counter. If not specified, both the RX and TX counters will be

cleared.

- (Optional) Clear the RX counter. If not specified, both the RX and TX counters will be

cleared.

- (Optional) Clear the TX counter. If not specified, both the RX and TX counters will be cleared.

ccm

- (Optional) Clear The CCM RX counters.

Restrictions

Only Administrator, Operator and Power-User level users can issue this command.

(EI Mode Only

Command)

Example

To clear all the CFM packet RX/TX counters:

DGS-3620-28SC:admin#clear cfm pkt_cnt

Command: clear cfm pkt_cnt

Success.

DGS-3620-28SC:admin#

Summary of Contents for xStack





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for xStack

Reviews:

Related manuals for xStack

Brands by name

Popular brands

D-Link xStack, Reference Manual

Search results

Summary of Contents for xStack

Reviews:

Related manuals for xStack

Brands by name

Popular brands