D-Link xStack Reference Manual Download Page 207

Page: 207 / 1284

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide

202

add

- Specifies that a filter list will be added.

delete

- Specifies that a filter list will be deleted.

<list_name 16>

- Enter the filter list name here. This name can be up to 16 characters long.

prefix_list

- (Optional) Specifies the name of a prefix_list to be applied as a filter. The filtering

can be applied to incoming routes or outgoing routes.

- Specifies that the filter specified will be used for incoming traffic.

out

- Specifies that the filter specified will be used for outgoing traffic.

add

- Specifies that a filter list will be added.

delete

- Specifies that a filter list will be deleted.

<list_name 16>

- Enter the prefic list name here. This name can be up to 16 characters long.

capability_orf_prefix_list

- (Optional) Used to configure an outbound route filter prefix list

capability. It can be sent with the following values:

receive

- Enables the ORF prefix list capability in the receiving direction. The local router will

install the prefix filter list notified by the remote router.

send

- Enables the ORF prefix list capability in the sending direction. The local router will

notify the remote router for the ORF prefix list capability.

both

- Enables the ORF prefix list capability in both received and send directions.

none

- Disable the ORF prefix list capability in both received and send directions.

Restrictions

Only Administrator, Operator and Power-User level users can issue this command.

(EI Mode Only

Command)

Example

This example shows how to configure the BGP neighbor ingress filter list for the peer group
“Campus” to List1:

DGS-3620-28SC:admin# config bgp neighbor filter peer_group Campus filter_list
in add List1

Command: config bgp neighbor filter peer_group Campus filter_list in add List1

Success.

DGS-3620-28SC:admin#

13-29

show bgp peer_group

Description

The command is used to show the information of the BGP peer group.

Format

show bgp peer_group {<peer_group_name 16>}

Parameters

peer_group

- (Optional) Name of the BGP peer group. The length is up to 16 bytes.

<peer_group_name 16>

- Enter the BGP peer group name here. This name can be up to 16

characters long.

It means to display all the BGP peer groups’ information that doesn’t specify the peer group

name.

Summary of Contents for xStack





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for xStack

Reviews:

Related manuals for xStack

Brands by name

Popular brands

D-Link xStack, Reference Manual

Search results

Summary of Contents for xStack

Reviews:

Related manuals for xStack

Brands by name

Popular brands