manualshive.com logo in svg

D-Link xStack, Reference Manual

The D-Link xStack, an advanced networking solution, offers unparalleled performance and scalability. Ensure a smooth setup process with the comprehensive Hardware Installation Manual. Download the manual for free from our website to effortlessly install and optimize your xStack for enhanced networking capabilities.

Share
Download
background image

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 

169 

 

parameter rises above this value, the action associated with the alarm is taken. 

<voltage>

 - Enter the high threshold alarm value used here. 

low_alarm

 - (Optional) Specify the low threshold for the alarm. When the operating parameter 

falls below this value, the action associated with the alarm is taken. 

<voltage>

 - Enter the low threshold alarm value used here. 

high_warning

 - (Optional) Specify the high threshold for the warning. When the operating 

parameter rises above this value, the action associated with the warning is taken.  

<voltage>

 - Enter the high threshold warning value here. 

low_warning

 - (Optional) Specify the low threshold for the warning. When the operating 

parameter falls below this value, the action associated with the warning is taken. 

<voltage>

 - Enter the low threshold warning value here. 

bias_current_threshold

 - Specifies the threshold of the optic module’s bias current. 

high_alarm

 - (Optional) Specify the high threshold for the alarm. When the operating 

parameter rises above this value, the action associated with the alarm is taken. 

<milliampere>

 - Enter the high threshold alarm value used here. 

low_alarm

 - (Optional) Specify the low threshold for the alarm. When the operating parameter 

falls below this value, the action associated with the alarm is taken. 

<milliampere>

 - Enter the low threshold alarm value used here. 

high_warning

 - (Optional) Specify the high threshold for the warning. When the operating 

parameter rises above this value, the action associated with the warning is taken.  

<milliampere>

 - Enter the high threshold warning value here. 

low_warning

 - (Optional) Specify the low threshold for the warning. When the operating 

parameter falls below this value, the action associated with the warning is taken. 

<milliampere>

 - Enter the low threshold warning value here. 

tx_power_threshold

 - Specifies the threshold of the optic module’s output power. 

high_alarm

 - (Optional) Specify the high threshold for the alarm. When the operating 

parameter rises above this value, the action associated with the alarm is taken. 

<mw_or_dbm>

 - Enter the high threshold alarm value used here. 

low_alarm

 - (Optional) Specify the low threshold for the alarm. When the operating parameter 

falls below this value, the action associated with the alarm is taken. 

<mw_or_dbm>

 - Enter the low threshold alarm value used here. 

high_warning

 - (Optional) Specify the high threshold for the warning. When the operating 

parameter rises above this value, the action associated with the warning is taken.  

<mw_or_dbm>

 - Enter the high threshold warning value here. 

low_warning

 - (Optional) Specify the low threshold for the warning. When the operating 

parameter falls below this value, the action associated with the warning is taken. 

<mw_or_dbm>

 - Enter the low threshold warning value here. 

rx_power_threshold

 - Specifies the threshold of optic module’s received power. 

high_alarm

 - (Optional) Specify the high threshold for the alarm. When the operating 

parameter rises above this value, the action associated with the alarm is taken. 

<mw_or_dbm>

 - Enter the high threshold alarm value used here. 

low_alarm

 - (Optional) Specify the low threshold for the alarm. When the operating parameter 

falls below this value, the action associated with the alarm is taken. 

<mw_or_dbm>

 - Enter the low threshold alarm value used here. 

high_warning

 - (Optional) Specify the high threshold for the warning. When the operating 

parameter rises above this value, the action associated with the warning is taken.  

<mw_or_dbm>

 - Enter the high threshold warning value here. 

low_warning

 - (Optional) Specify the low threshold for the warning. When the operating 

parameter falls below this value, the action associated with the warning is taken. 

<mw_or_dbm>

 - Enter the low threshold warning value here. 

state

 - (Optional) Specify the DDM state to enable or disable. If the state is disabled, no DDM 

action will take effect. 

enable

 - Specifies to enable the DDM state. 

disable

 - Specifies to disable the DDM state. 

shutdown

 - (Optional) Specify whether or not to shutdown the port when the operating 

parameter exceeds the corresponding alarm threshold or warning threshold. 

alarm

 - Shutdown the port when the configured alarm threshold range is exceeded. 

warning

 - Shutdown the port when the configured warning threshold range is exceeded. 

none

 - The port will never shutdown regardless if the threshold ranges are exceeded or not. 

 

Summary of Contents for xStack





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for xStack

N-Com B901 Quick Manual preview
B901
Brand: N-Com Pages: 2
R.V.R. Elettronica HC5 User Manual preview
HC5
Brand: R.V.R. Elettronica Pages: 38
Magnavox MME239 - Micro DVD Home Theater System User Manual preview
MME239 - Micro DVD Home Theater System
Brand: Magnavox Pages: 39
B&O Play BeoPlay S8 User Manual preview
BeoPlay S8
Brand: B&O Play Pages: 52
Scott SMV100 Owner'S Manual preview
SMV100
Brand: Scott Pages: 29
Sony MDR-HW300K Operating Instructions preview
MDR-HW300K
Brand: Sony Pages: 2
Sony MHC-C305 Operating Instructions Manual preview
MHC-C305
Brand: Sony Pages: 20
Sony MHC-C20 Operating Instructions Manual preview
MHC-C20
Brand: Sony Pages: 28
Sony MHC-331 Primary Operating Instructions Manual preview
MHC-331 Primary
Brand: Sony Pages: 28
Sony MHC-991AV Operating Instructions Manual preview
MHC-991AV
Brand: Sony Pages: 33
Sony MEX-N4050BT Operating Instructions Manual preview
MEX-N4050BT
Brand: Sony Pages: 28
Sony MHC-D60 Operating Instructions Manual preview
MHC-D60
Brand: Sony Pages: 44
Sony MG110 Operating Instructions Manual preview
MG110
Brand: Sony Pages: 40
Sony MHC-BX2 Operating Instructions Manual preview
MHC-BX2
Brand: Sony Pages: 44
Sony MHC-D90AV Operating Instructions Manual preview
MHC-D90AV
Brand: Sony Pages: 50
Sony MHC-BX5 Operating Instructions Manual preview
MHC-BX5
Brand: Sony Pages: 48
Sony MHC-BX3 Operating Instructions Manual preview
MHC-BX3
Brand: Sony Pages: 48
Sony MHC-1750 - Hifi Bookshelf System Operating Instructions Manual preview
MHC-1750 - Hifi Bookshelf System
Brand: Sony Pages: 46

Brands by name

Popular brands

Load more brands