manualshive.com logo in svg

D-Link xStack, Reference Manual

The D-Link xStack, an advanced networking solution, offers unparalleled performance and scalability. Ensure a smooth setup process with the comprehensive Hardware Installation Manual. Download the manual for free from our website to effortlessly install and optimize your xStack for enhanced networking capabilities.

Share
Download
background image

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 

131 

 

mask

 - Specifies the destination IP address used here. 

<netmask>

 - Enter the destination network mask here. 

dscp

 - (Optional) Specifies the value of DSCP. The DSCP value ranges from 0 to 63. 

<value 0-63>

 - Enter the DSCP value used here. This value must be between 0 and 63. 

icmp

 - (Optional) Specifies that the following parameters configured will apply to the ICMP 

configuration. 

type

 - Specifies that the rule will apply to the ICMP type traffic value. 

<value 0-255>

 - Enter the ICMP traffic type value here. This value must be between 0 

and 255. 

code

 - Specifies that the rule will apply to the ICMP code traffic value. 

<value 0-255>

 - Enter the ICMP code traffic value here. This value must be between 0 

and 255. 

igmp

 - (Optional) Specifies that the following parameters configured will apply to the IGMP 

configuration. 

type

 - Specifies that the rule will apply to the IGMP type traffic value. 

<value 0-255>

 - Enter the IGMP type traffic value here. This value must be between 0 

and 255. 

tcp

 - (Optional) Specifies that the following parameters configured will apply to the TCP 

configuration. 

src_port

 - Specifies that the rule will apply to a range of TCP source ports. 

<value 0-65535>

 - Enter the source port value here. This value must be between 0 and 

65535. 

mask

 - Specifies the TCP source port mask here. 

<hex 0x0-0xffff>

 - Enter the TCP source port mask value here. 

dst_port

 - Specifies that the rule will apply to a range of TCP destination ports. 

<value 0-65535>

 - Enter the destination port value here. This value must be between 0 

and 65535. 

mask

 - Specifies the TCP destination port mask here. 

<hex 0x0-0xffff>

 - Enter the TCP destination port mask value here. 

flag

 - (Optional) Specifies the TCP flag fields. 

all

 - Specifies that the TCP flag field will be set to 'all'. 

urg

 - Specifies that the TCP flag field will be set to 'urg'. 

ack

 - Specifies that the TCP flag field will be set to 'ack'. 

psh

 - Specifies that the TCP flag field will be set to 'psh'. 

rst

 - Specifies that the TCP flag field will be set to 'rst'. 

syn

 - Specifies that the TCP flag field will be set to 'syn'. 

fin

 - Specifies that the TCP flag field will be set to 'fin'. 

udp

 - (Optional) Specifies that the following parameters configured will apply to the UDP 

configuration. 

src_port

 - Specifies the UDP source port range. 

<value 0-65535>

 - Enter the UDP source port range value here. 

mask

 - Specifies the UDP source port mask here. 

<hex 0x0-0xffff>

 - Enter the UDP source port mask value here. 

dst_port

 - Specifies the UDP destination port range. 

<value 0-65535>

 - Enter the UDP destination port range value here. 

mask

 - Specifies the UDP destination port mask here. 

<hex 0x0-0xffff>

 - Enter the UDP destination port mask value here. 

protocol_id

 - (Optional) Specifies that the rule will apply to the value of IP protocol ID traffic. 

<value 0-255>

 - Enter the protocol ID used here. This value must be between 0 and 255. 

user_define

 - (Optional) Specifies that the rule will apply to the IP protocol ID and that the 

mask options behind the IP header, which has a length of 20 bytes. 

<hex 0x0-0xffffffff>

 - Enter the user-defined mask value here. 

mask

 - Specifies the user-defined mask here. 

<hex 0x0-0xffffffff>

 - Enter the user-defined mask value here. 

ipv6

 - Specifies the rule applies to IPv6 fields. 

class

 - (Optional) Specifies the value of IPv6 class. 

<value 0-255>

 - Enter the IPv6 class value here. This value must be between 0 and 255. 

source_ipv6

 - (Optional) Specifies the value of IPv6 source address. 

<ipv6addr>

 - Enter the source IPv6 source address here. 

mask

 - Specifies the IPv6 source address mask here. 

Summary of Contents for xStack





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for xStack

Panasonic SC-PM250 Operating Instructions preview
SC-PM250
Brand: Panasonic Pages: 2
Teac CR-K1 Service Manual preview
CR-K1
Brand: Teac Pages: 16
H&B HF-275 Operating Instructions Manual preview
HF-275
Brand: H&B Pages: 9
iWantit iDABHF12 Instruction Manual preview
iDABHF12
Brand: iWantit Pages: 32
Emerson ES28 Owner'S Manual preview
ES28
Brand: Emerson Pages: 22
Emerson ES27 Owner'S Manual preview
ES27
Brand: Emerson Pages: 22
Emerson ES13 Owner'S Manual preview
ES13
Brand: Emerson Pages: 27
Emerson ES128 Owner'S Manual preview
ES128
Brand: Emerson Pages: 30
Emerson CKD9906 Owner'S Manual preview
CKD9906
Brand: Emerson Pages: 27
Emerson ES3 Owner'S Manual preview
ES3
Brand: Emerson Pages: 40
Emerson ES30 Owner'S Manual preview
ES30
Brand: Emerson Pages: 44
Emerson ES1065 Owner'S Manual preview
ES1065
Brand: Emerson Pages: 44
Technika MC-229I Owner'S Handbook Manual preview
MC-229I
Brand: Technika Pages: 16
Sony CMT-HPR99XM Marketing Specifications preview
CMT-HPR99XM Marketing
Brand: Sony Pages: 2
Sony CMT-HPR99XM Specifications preview
CMT-HPR99XM
Brand: Sony Pages: 2
Sony CMT-HPR90 Marketing Specifications preview
CMT-HPR90 Marketing
Brand: Sony Pages: 2
Sony CMT-HPR90 Specifications preview
CMT-HPR90
Brand: Sony Pages: 2
Sony CMT-GS30DAB Operating Instructions preview
CMT-GS30DAB
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands