D-Link xStack, Reference Manual

Page: 922 / 1284

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
917
Upstream : n1
Upstream State : RPT not joined
RPF Neighbor : FE80::68FE
Override Timer : 3 sec
Pruned : n10
Outgoing : -
Total Entries: 2
DGS-3620-28SC:admin#
78-13 create pim6 static_rp group
Description
This command is used to create a static RP. Generally a static RP can’t override a dynamic RP. If
the option ‘override_dynamic’ is chosen, the static RP will override any dynamically learned RP.
Format
create pim6 static_rp group <ipv6networkaddr> rp <ipv6addr> {override_dynamic}
Parameters
group - Specifies the multicast group network address for this static RP.
<ipv6networkaddr> - Enter the IPv6 group network address used here.
rp - Specifies the IPv6 address to this static RP.
<ipv6addr> - Enter the IPv6 address used here.
override_dynamic - (Optional) Specifies that the static RP will override the dynamically learned
RP.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
To create a static RP:
DGS-3620-28SC:admin# create pim6 static_rp group FF1E::/64 rp 3000::12
Command: create pim6 static_rp group FF1E::/64 rp 3000::12
Success.
DGS-3620-28SC:admin#
78-14 delete pim6 static_rp group
Description
This command is used to delete a static RP.