manualshive.com logo in svg

D-Link xStack, Reference Manual

The D-Link xStack, an advanced networking solution, offers unparalleled performance and scalability. Ensure a smooth setup process with the comprehensive Hardware Installation Manual. Download the manual for free from our website to effortlessly install and optimize your xStack for enhanced networking capabilities.

Share
Download
background image

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 

158 

 

vlan

 - (Optional) The name of the VLAN corresponding to the IP interface. 

<vlan_name 32> 

- Enter the VLAN name. The maximum length is 32 characters. 

state

 - Enable or disable the IP interface. 

enable

 - Enable the IP interface. 

disable

 - Disable the IP interface. 

proxy_arp

 - (Optional) Enable or disable the proxy ARP. This is for the IPv4 function. The default 

is disabled. 

enable

 - Enable the proxy ARP. 

disable

 - Disable the proxy ARP. 

local

 - (Optional) This setting controls whether the system provides the proxy reply for the ARP 

packets destined for IP addresses located in the same interface as the received interface. 
When proxy ARP is enabled for an interface, the system will do the proxy reply for the ARP 
packets destined for IP addresses located on a different interface. For ARP packets destined 
for IP address located on the same interface, the system will check this setting to determine 
whether to reply. The default is disabled. 

enable

 - Enable the local proxy ARP function. 

disable

 - Disable the local proxy ARP function. 

bootp

 - Allows the selection of the BOOTP protocol for the assignment of an IP address to the 

switch’s System IP interface. 

dhcp

 - Allows the selection of the DHCP protocol for the assignment of an IP address to the 

switch’s System. 

ipv6

 - The following are IPv6-related parameters. 

ipv6address

 - The IPv6 address and subnet prefix of the IPV6 address to be created. 

prefix_name

 - Specifies the IPv6 prefix name. 

<string 1-12>

 - Enter the IPv6 prefix name. This name can be up to 12 characters long. 

<ipv6networkaddr>

 - The IPv6 address and subnet prefix of the IPV6 address to be 

created. 

state

 - Enable or disable the IPv6 state of the IP interface. 

enable

 - Enable the IPv6 state of the IP interface. 

disable

 - Disable the IPv6 state of the IP interface. 

ip_mtu

 - Specifies the IP Layer MTU value used. 

<value 512-1712>

 - Enter the IP Layer MTU value used here. The value must be between 

512 and 1712. 

ipv4 state

 - The state of the IPv4 interface. 

enable

 - Enable the IPv4 state of the IP interface. 

disable

 - Disable the IPv4 state of the IP interface. 

dhcpv6_client

 - Specifies the DHCPv6 client state of the interface. 

enable

 - Specifies that the DHCPv6 client state of the interface will be enabled. 

disable

 - Specifies that the DHCPv6 client state of the interface will be disabled. 

ip_directed_broadcast

 - Specifies the IP directed-broadcast state of the interface. 

enable

 - Specifies that the IP directed-broadcast state of the interface will be enabled. 

disable

 - Specifies that the IP directed-broadcast state of the interface will be disabled. 

dhcpv6_client_pd

 - Specifies the DHCPv6 client PD configuration. 

enable

 - Specifies to enable the DHCPv6 client PD state of the interface. 

prefix_name

 - Specifies an alias name for the prefix requested from the delegation router. If 

disable the DHCPv6 client PD the name will be automatic clear. 

<string 1-12>

 - Enter the prefix alias name. This name can be up to 12 characters long. 

disable

 - Specifies to disable the DHCPv6 client PD state of the interface. 

 

Restrictions 

Only Administrator, Operator and Power-User level users can issue this command. 

 

Example 

To configure the System IP interface: 

DGS-3620-28SC:admin#config ipif System vlan v1 

Summary of Contents for xStack





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for xStack

Panasonic SC-HC57 Owner'S Manual preview
SC-HC57
Brand: Panasonic Pages: 24
Panasonic SC-AP01 Operating Instructions Manual preview
SC-AP01
Brand: Panasonic Pages: 16
On-Hold Plus OHP-6000 User Manual preview
OHP-6000
Brand: On-Hold Plus Pages: 12
Blaupunkt MS16BT Series Owner'S Manual preview
MS16BT Series
Brand: Blaupunkt Pages: 103
Philips FW-C280 User Manual preview
FW-C280
Brand: Philips Pages: 2
Philips FW-C28 Specifications preview
FW-C28
Brand: Philips Pages: 2
Philips FW-C250 Specifications preview
FW-C250
Brand: Philips Pages: 2
Philips FW-C255 Specifications preview
FW-C255
Brand: Philips Pages: 2
Philips FW-C155 Specifications preview
FW-C155
Brand: Philips Pages: 2
Philips FW-C10 Specifications preview
FW-C10
Brand: Philips Pages: 2
Philips FW-C1 Specifications preview
FW-C1
Brand: Philips Pages: 2
Philips FW-996 Quick Use Manual preview
FW-996
Brand: Philips Pages: 2
Philips FW P880 Specifications preview
FW P880
Brand: Philips Pages: 2
Philips FW P88 Specifications preview
FW P88
Brand: Philips Pages: 2
Philips FW M575 Specifications preview
FW M575
Brand: Philips Pages: 3
Philips FW-C28 User Manual preview
FW-C28
Brand: Philips Pages: 24
Philips FW-C250 User Manual preview
FW-C250
Brand: Philips Pages: 28
Philips FW-C10 User Manual preview
FW-C10
Brand: Philips Pages: 22

Brands by name

Popular brands

Load more brands