D-Link xStack Reference Manual Download Page 743

Page: 743 / 1284

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide

738

delete

- (Optional) Specifies the mirror source ports to be delete

source

- (Optional) Specifies the source ports used.

ports

- (Optional) Specifies the list of ports used as source ports.

<portlist>

- Enter the list of ports to be used as the source ports here.

- (Optional) Specifies that only the received packets on the mirror group source ports will be

mirrored to the mirror group target port.

- (Optional) Specifies that only the sent packets on the mirror group source ports will be

mirrored to the mirror group target port.

both

- (Optional) Specifies that both the received and sent packets on the mirror group source

ports will be mirrored to the mirror group target port.

state

- (Optional) Specifies the mirror group state to enable or disable the mirror group function.

enable

- Specifies that the mirror group state will be enabled.

disable

- Specifies that the mirror group state will be disabled.

Restrictions

Only Administrator and Operator-level users can issue this command.

Example

Configure mirror group 2 with state enable and add source ports 1:4-1:9:

DGS-3620-28SC:admin# config mirror group_id 2 state enable add source ports
1:4-1:9 both

Command: config mirror group_id 2 state enable add source ports 1:4-1:9 both

Success.

DGS-3620-28SC:admin#

63-4

delete mirror group_id

Description

This command is used to delete a mirror group on the Switch.

Format

delete mirror group_id <value 1-4>

Parameters

<value 1-4>

- Enter the mirror group ID used here. This value must be between 1 and 4.

Restrictions

Only Administrator and Operator-level users can issue this command.

Example

To delete mirror group 3:

Summary of Contents for xStack





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for xStack

Reviews:

Related manuals for xStack

Brands by name

Popular brands

D-Link xStack, Reference Manual

Search results

Summary of Contents for xStack

Reviews:

Related manuals for xStack

Brands by name

Popular brands