69
DWS-1008 User’s Manual
D-Link Systems, Inc.
Configuring and Managing Ports and VLANs
Displaying PoE State
To display the PoE state of a port, use the following command:
show port poe
[
port-list
]
To display PoE information for ports 1 and 3, type the following command:
DWS-1008#
show port poe 1,3
Link
Port
PoE
PoE
Port Name
Status
Type
config
Draw
=============================================================
1
1
down
AP
disabled
off
3
3
up
AP
enabled
1.44
In this example, PoE is disabled on port 1 and enabled on port 3. The access point connected
to port 3 is drawing 1.44 W of power from the switch.
Displaying Port Statistics
To display port statistics, use the following command:
show port counters
[
octets
|
packets
|
receive-errors
|
transmit-errors
|
collisions
|
receive-etherstats
|
transmit-etherstats
] [
port
port-list
]
You can specify one statistic type with the command. For example, to display octet
statistics for port 3, type the following command:
DWS-1008#
show port counters octets port 3
Port Status
Rx Octets
Tx Octets
====================================
3
Up
27965420
34886544
Note:
To display all types of statistics with the same command, use the
monitor port
counters
command.
Clearing Statistics Counters
To clear all port statistics counters, use the following command:
clear port counters
The counters begin incrementing again, starting from 0.
Summary of Contents for DWS-1008
Page 1: ......
