222
DWS-1008 User’s Manual
D-Link Systems, Inc.
Configuring and Managing STP
222
D-Link Systems, Inc.
bridge forward delay
15
topology change initiator
0
last topology change occurred: Tue Jul 01 2003 22:33:36.
topology change FALSE
topology change time
35
topology change detected FALSE
topology change count
1
topology change last recvd. from 00-0b-0e-02-76-f6
Other port specific info
dynamic max age transition 0
port BPDU ok count
21825
msg age expiry count
0
link loading
0
BPDU in processing
FALSE
num of similar BPDU’s to process
0
received_inferior_bpdu
FALSE
next state
0
src MAC count
21807
total src MAC count
21825
curr_src_mac
00-0b-0e-00-04-30
next_src_mac
00-0b-0e-02-76-f6
Clearing STP Statistics
To clear the STP statistics counters, use the following command:
clear spantree statistics
port-list
[
vlan
vlan-id
]
As soon as you enter the command, MSS resets the STP counters for the specified ports or
VLANs to 0. The software then begins incrementing the counters again.
Spanning Tree Configuration Scenario
This scenario configures a VLAN named backbone for a switch’s connections to the
network backbone, adds ports 2 and 3 to the VLAN, and enables STP on the VLAN to
prevent loops.
1.
Remove the network cables from ports 2 and 3 or use MSS to disable the ports. This
prevents a loop until you complete the STP configuration. To disable the ports and verify the
results, type the following commands:
DWS-1008#
set port disable 2-3
success: set “disable” on port 2-3
Summary of Contents for DWS-1008
Page 1: ......
