68
DWS-1008 User’s Manual
D-Link Systems, Inc.
Configuring and Managing Ports and VLANs
Resetting a Port
You can reset a port by toggling its link state and PoE state. MSS disables the port’s link and
PoE (if applicable) for at least one second, then reenables them.
This feature is useful for forcing a DWL-8220 access point that is connected to two
DWS-1008 switches to reboot using the port connected to the other switch.
To reset a port, use the following command:
reset port
port-list
Displaying Port Information
You can use CLI commands to display the following port information:
•
Port configuration and status
•
PoE state
•
Port statistics
You also can configure MSS to display and regularly update port statistics in a separate window.
Displaying Port Configuration and Status
To display port configuration and status information, use the following command:
show port status
[
port-list
]
To display information for all ports, type the following command:
Note:
PoE is supported only on 10/100 Ethernet ports. PoE is not supported on ports 7 and
8.
DWS-1008#
show port status
Port Name Admin Oper
Config Actual
Type
Media
========================================================
1
1
up
up
auto 100/full
network
10/100BaseTx
2
2
up
down
auto
network
10/100BaseTx
3
3
up
down
auto
network
10/100BaseTx
4
4
up
down
auto
network
10/100BaseTx
5
5
up
down
auto
network
10/100BaseTx
6
6
up
up
auto 100/full
network
10/100BaseTx
7
7
up
down
auto
network
10/100BaseTx
8
8
up
down
auto
network
10/100BaseTx
In this example, two of the switch’s ports, 1 and 6, have an operational status of
up
, indicating
the links on the ports are available.
Summary of Contents for DWS-1008
Page 1: ......
