14
DWS-1008 User’s Manual
D-Link Systems, Inc.
Configuration (continued)
Configuration
• Administrative user admin1, with password letmein. The only management access
the switch allows by default is CLI access through the serial connection.
• System Time and date parameters:
• Date: 15th of August, 2005
• Time: 6:58 PM
• Timezone: PST (Pacific Standard Time), with an offset of -8 hours from
Universal Coordinated Time (UTC)
• Unencrypted SSID name: public
• Encrypted SSID name: corporate
• Username alice and password alicepass for 802.1X authentication; username bob
and password bobpass for 802.1X authentication
• Directly connected DWL-8220AP access points on port 2 and 3
The IP addresses, usernames, and passwords in this document are examples. Use values
that are appropriate for your organization.
If you configure time and date parameters, you will be required to enter a name for the
timezone, and then enter the value of the timezone (the offset from UTC) separately. You can
use a string of up to 32 alphabetic characters as the timezone name.
The image below shows an example. Users bob and alice can access encrypted SSID
corporate on either of the DWL-8220AP access points. Users user1 and user2 can use the
same APs to access unencrypted SSID public. Although the same hardware supports both
SSIDs and sets of users, AAA ensures that only the users who are authorized to access an
SSID can access that SSID. Users of separate SSIDs can even be in the same VLAN, as
they are in this example.
Summary of Contents for DWS-1008
Page 1: ......
