5
DWS-1008 User’s Manual
D-Link Systems, Inc.
Installation Overview
Installation Overview
Caution:
The DWS-1008 switch has been designed and tested to be installed in an operating
ambient temperature of 0° C to +40° C (32° F to 104° F). To reduce the risk of equipment
damage, install equipment with consideration to these ambient conditions.
Serial Console Cable
The serial console port has a female DB-9 connector and supports the EIA-232D signaling
standard. You need a standard DB-9-male-to-DB-9-female PC modem cable.
Serial Console Pin Signals
Switch Pin
Usage
PC Pin
Usage
2
Receive
3
Transmit
3
Transmit
2
Receive
5
Ground
5
Ground
10/100 Ethernet Cable Wiring
Connections on the 10/100 ports require CAT5 cable based on the EIA/TIA-586 standard.
The 10/100 Ethernet ports on the DWS-1008 switch provide automatic MDI/MDX, which
automatically crosses over the send and receive signals if required.
The table below lists the pin signals for 10/100 Ethernet straight-through wiring. Pins 4, 5,
7, and 8 are used only when Power over Ethernet (PoE) is enabled on the port. RD means
Receive Data and TD means Transmit Data.
DWS Switch
Other Device
Pin
Function
Pin
Function
1
RD+
1
TD+
2
RD-
2
TD-
3
TD+
3
RD+
4
PoE+
4
PoE+
5
PoE+
5
PoE+
6
TD-
6
RD-
7
PoE-
7
PoE-
8
PoE-
8
PoE-
Note:
Mounting a DWL-8220AP access point on a solid surface requires CAT5 cable that
does not have strain relief. For installation on all other surfaces, you can use CAT5 cable
with or without strain relief.
Summary of Contents for DWS-1008
Page 1: ......
