170
DWS-1008 User’s Manual
D-Link Systems, Inc.
Configuring DWL-8220AP Access Points
DWS-1008#
clear ap 3 radio 2
Restarting an AP
To restart an access point, use the following command:
reset
{
ap
port-list
|
dap
dap-num
}
Use the
reset ap
command to reset an access point configured on an AP access port. Use
the
reset dap
command to reset a Distributed AP.
When you enter one of these commands, the access point drops all sessions and reboots.
Caution:
Restarting a DWL-8220AP access point can cause data loss for users who are
currently associated with the AP.
Displaying AP Information
You can display the following AP information:
• AP and radio-specific configuration settings
• List of Distributed APs that are not configured on a switch
• Connection information for Distributed APs
• Service profile information
• Radio profile information
• Status information
• Statistics counters
Displaying AP Configuration Information
To display configuration information, use the following commands:
show ap config
[
port-list
[
radio
{
1
|
2
}]]
show dap config
[
dap-num
[
radio
{
1
|
2
}]]
The command lists information separately for each access point.
To display configuration information for an access point on DWS-1008 port 2, type the
following command:
DWS-1008#
show ap config 2
Port 2: AP model: DWL-8220Ap, POE: enable, bias: high, name: AP02
boot-download-enable: YES
load balancing group: none
Radio 1: type: 802.11g, mode: disabled, channel: 6
tx pwr: 1, profile: default
auto-tune max-power: default, min-client-rate: 5.5, max-retransmissions: 10
Radio 2: type: 802.11a, mode: disabled, channel: 36
tx pwr: 1, profile: default
Summary of Contents for DWS-1008
Page 1: ......
