D-Link DWS-1008, User Manual

Page: 43 / 454

38
DWS-1008 User’s Manual
D-Link Systems, Inc.
Configuration (continued)
Configuration
Parameter Default Value Radio Behavior When Parameter Set To Default Values
psk-phrase No passphrase Uses dynamically generated keys rather than
defined statically configured keys to authenticate WPA
clients.
psk-raw No preshared Uses dynamically generated keys rather than
key defined statically configured keys to authenticate WPA
clients.
rsn-ie disable Does not use the RSN IE in transmitted frames.
shared-key-auth disable Does not use shared-key authentication. This
parameter does not enable PSK authentication for
WPA. To enable PSK encryption for WPA, use the
set radio-profile auth-psk command.
ssid-name default Uses the SSID name default.
ssid-type crypto Encrypts wireless traffic for the SSID.
tkip-mc-time 60000 Uses Michael countermeasures for 60,000 ms
(60 seconds) following detection of a second MIC
failure within 60 seconds.
web-aaa-form Not configured For WebAAA users, serves the default login web
page or, if configured, the SSID-specific login web
page.
wep key-index No keys defined Uses dynamic WEP rather than static WEP.
wep active- 1 Uses WEP key 1 for static WEP encryption of
multicast-index multicast traffic if WEP encryption is enabled and
keys are defined.
wep active- 1 Uses WEP key 1 for static WEP encryption of
unicast-index unicast traffic if WEP encryption is enabled and
keys are defined.
wpa-ie disable Does not use the WPA IE in transmitted frames.