325
DWS-1008 User’s Manual
D-Link Systems, Inc.
Configuring Communication with RADIUS
The following command disables load balancing for a server group:
clear server group
group-name
load-balance
Adding Members to a Server Group
To add RADIUS servers to a server group, type the following command:
set server group
group-name
members
server-name1
[
server-name2
] [
server-name3
]
[
server-name4
]]
The keyword
members
lists the RADIUS servers contained in the named server group. A
server group can contain between one and four RADIUS servers. This command accepts
any RADIUS servers as the current set of servers. To change the server members, you must
reenter all of them.
For example, to add RADIUS server
coot
to server group
shorebirds
:
1.
Determine the server group by typing the following command:
DWS-1008#
show aaa
Radius Servers
Server
Addr
Ports
T/o Tries Dead State
---------------------------------------------------------------------------------------------------
sandpiper 192.168.253.3
1812 1813 5 3 0
UP
heron
192.168.253.1
1812 1813 5 3 0
UP
coot
192.168.253.4
1812 1813 5 3 0
UP
egret
192.168.253.2
1812 1813 5 3 0
UP
Server groups
shorebirds (load-balanced): sandpiper heron egret
The RADIUS server
coot
is configured but not part of the server group
shorebirds.
2.
To add RADIUS server
coot
as the last server in the server group
shorebirds
, type the
following command:
DWS-1008#
set server group shorebirds members sandpiper heron egret coot
success: change accepted.
Deleting a Server Group
To remove a server group, type the following command:
clear server group
group-name
For example, to delete the server group
shorebirds
, type the following command:
Summary of Contents for DWS-1008
Page 1: ......
