203
DWS-1008 User’s Manual
D-Link Systems, Inc.
Configuring RF Auto-Tuning
Changing Power Tuning Settings
Enabling Power Tuning
RF AutoTuning for power is disabled by default. To enable or disable the feature for all
radios in a radio profile, use the following command:
set
radio-profile
name
auto-tune
power-config
{
enable
|
disable
}
To enable power tuning for radios in the
rp2
radio profile, type the following command:
DWS-1008#
set radio-profile rp2 auto-tune power-config enable
success: change accepted.
Changing the Power Tuning Interval
The default power tuning interval is 300 seconds. You can change the interval to a value from
1 to 65535 seconds. To change the power tuning interval, use the following command:
set
radio-profile
name
auto-tune
power-interval
seconds
To set the power tuning interval for radios in radio profile
rp2
to 240 seconds, type the following
command:
DWS-1008#
set radio-profile rp2 auto-tune power-interval 240
success: change accepted.
Changing the Power Backoff Interval
The default power backoff interval is 10 seconds. You can change the interval to a value from
0 to 65535 seconds. To change the power backoff interval, use the following command:
set
radio-profile
name
auto-tune
power-backoff-timer
seconds
To change the power-backoff interval for radios in radio profile
rp2
to 15 seconds, type the
following command:
DWS-1008#
set radio-profile rp2 auto-tune power-backoff-timer 15
success: change accepted.
Summary of Contents for DWS-1008
Page 1: ......
