218
DWS-1008 User’s Manual
D-Link Systems, Inc.
Configuring and Managing STP
218
D-Link Systems, Inc.
Configuring Backbone Fast Convergence
To enable or disable backbone fast convergence, use the following command:
set spantree backbonefast
{
enable
|
disable
}
To enable backbone fast convergence on all VLANs, type the following command:
DWS-1008#
set spantree backbonefast enable
success: change accepted.
Displaying the Backbone Fast Convergence State
To display the state of the backbone fast convergence feature, use the following command:
show spantree backbonefast
Here is an example:
DWS-1008#
show spantree backbonefast
Backbonefast is enabled
In this example, backbone fast convergence is enabled.
Configuring Uplink Fast Convergence
To enable or disable uplink fast convergence, use the following command:
set spantree uplinkfast
{
enable
|
disable
}
Displaying Uplink Fast Convergence Information
To display uplink fast convergence information, use the following command:
show spantree uplinkfast
[
vlan
vlan-id
]
The following command displays uplink fast convergence information for all VLANs:
DWS-1008#
show spantree uplinkfast
VLAN
port
list
------------------------------------------------------------------------
1
1(fwd),2,3
In this example, ports 1, 2, and 3 provide redundant links to the network core. Port 1 is
forwarding traffic. The remaining ports block traffic to prevent a loop.
Summary of Contents for DWS-1008
Page 1: ......
