D-Link DSN-2100-10 - xStack Storage Area Network Array Hard..., User Manual

Page: 19 / 166

xStack Storage User’s Guide 19
2.1.3.2 Drive and Tray Installation
A drive/tray assembly can be installed by inserting the drive/tray assembly into the open
drive bay as shown in Figure 2-4. Push the tray at the point indicated in Step 2 of Figure 2-5
and push until it is seated firmly within the bay. As you press, you will see the tray handle
begin to move inwards as the locking mechanism enters the locking slot. When you see this,
then you must push the tray handle inwards as shown in Figure 2-6 until you hear the green
locking mechanism click.
Figure 2-4 Drive/Tray Installation
Figure 2-5 Press Here Until You See the Lever Move Inwards