D-Link DSN-2100-10 - xStack Storage Area Network Array Hard..., User Manual

Page: 152 / 166

152 Chapter 2 Identifying Hardware Components
5. Your hard drive is ready for installation. Proceed to D.3.3.
D.3.3 Drive and Tray Installation
A drive/tray assembly can be installed by inserting the drive/tray assembly into the open drive
bay as shown in Figure D-13. Push the tray at the point indicated in Step 2 of Figure D-14 and
push until it is seated firmly within the bay. As you press, you will see the tray handle begin to
move inwards as the locking mechanism enters the locking slot. When you see this, then you
must push the tray handle inwards as shown in Figure D-15 until you hear the green locking
mechanism click.
Figure D-13 Drive/Tray Installation