140
Appendix C Performing Advanced Diagnostics
C.2.1 Restoring Factory Defaults
To reset the xStack Storage Array to factory-default settings, use the following procedure.
This procedure will require you to restart the xStack Storage Array.
1.
From the management port diagnostic menu, type
1
and press Enter. A prompt asks
whether you also want to reset the management port IP address (see Figure C-4).
Figure C-4. Prompt for Resetting the Management Port IP Address
2.
To also reset the management port IP address to its default setting, type
y
. Otherwise,
type
n.
3.
Press Enter. A prompt asks whether you are sure you want to reset the xStack Storage
Array to factory-default settings (see Figure C-5).
Figure C-5. Prompt for Resetting the xStack Storage Array to Factory-Default Settings
Summary of Contents for DSN-2100-10 - xStack Storage Area Network Array Hard...
