D-Link DES-3010FA, Web User Manual

Page: 17 / 281

D-Link DES-3010FA/GA User Guide
Page 16
LED Defiitions
The device front panels contain Light Emitting Diodes (LED) that indicate the device status.The different LED
types are as follows:
•
Port LEDs — Indicate each port status.
•
Power LED — Indicating the device power supply status.
Port LEDs
10/100Base-TX Fast Ethernet
RJ-45 Port LEDs
The following figure illustrates the port LEDs.
Figure 5: 10/100Base-TX Fast Ethernet RJ-45 Port LEDs
The RJ-45 ports have two LEDs, one for speed, and one for Link /activity. The LED indications are described in
the following table:
1000Base-T Gigabit Ethernet
RJ-45 Port LEDs
The following figure illustrates the port LEDs.
Table 3: 10/100Base-TX Fast Ethernet RJ-45 Port LED Indications
P o r t D e s c r i p t i o n L E D I n d i c a t i o n D e s c r i p t i o n
Left LED - Speed Green A 100-Mbps link is established on the port.
Off
A 10-Mbps link is established on the port or no link is estab-
lished on the port.
Link/Activity LED Green A link is established on the port.
Flashing Green There is data transmission on the port.
Off No link is established on the link.