D-Link DES-3010FA, Web User Manual

Page: 117 / 281

D-Link DES-3010FA/GA User Guide
Page 116
Configuring GARP
This section contains information for configuring This section includes the following topics:
•
Defining GARP
•
Defining GVRP
Defining GARP
Generic Attribute Registration Protocol (GARP) protocol is a general-purpose protocol that registers any network
connectivity or membership-style information. GARP defines a set of devices interested in a given network
attribute, such as VLAN or multicast address. When configuring GARP, ensure the following:
•
The leave time must be greater than or equal to three times the join time.
•
The leave-all time must be greater than the leave time.
•
Set the same GARP timer values on all Layer 2-connected devices. If the GARP timers are set differently on
the Layer 2-connected devices, the GARP application does not operate successfully.
To define GARP on the device:
1. Click Basic Setup > VLAN > GARP . The GARP Parameters Page opens:
Figure 66: GARP Parameters Page
The GARP Parameters Page contains the following fields:
•
Copy from Entry Number — Indicates the row number from which GARP parameters are copied.
•
To Row Number — Indicates the row number to which GARP parameters are copied.
•
Interface — Displays the port or LAG on which GARP is enabled.