D-Link DES-3010FA Web User Manual Download Page 221

Page: 221 / 281

D-Link DES-3010FA/GA User Guide

Page 220

Servers Updates

, and

Enable Receive Unicast Servers Updates

fields are all enabled, the system time is set

according the Unicast server time information. The possible values are:

–

Enable

— Enables the device to receive Unicast server updates.

–

Disable

— Disables the device from receiving Unicast server updates.

•

Enable Poll Unicast Servers

— Defines whether or not the device sends SNTP Unicast forwarding informa-

tion to the SNTP server. The possible values are:

–

Enable

— Enables the device to receive Poll

Unicast server updates.

–

Disable

— Disables the device from receiving Poll

Unicast server updates.

Define the

Poll Interva

Enable Receive Broadcast Servers Update

Enable Receive Anycast Servers

Update

Enable Receive Unicast Servers Update

, and

Enable Poll Unicast Servers

fields and select at least

one of the

Enable

fields.

Click

. The SNTP global settings are defined, and the device is updated.

Summary of Contents for DES-3010FA


























































































































































































































































































Search results

Summary of Contents for DES-3010FA

Reviews:

Related manuals for DES-3010FA

Brands by name

Popular brands

D-Link DES-3010FA, Web User Manual

Search results

Summary of Contents for DES-3010FA

Reviews:

Related manuals for DES-3010FA

Brands by name

Popular brands