D-Link DAS-3636, Cli Reference Manual

Page: 152 / 480

DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
DAS-3626:admin#show port dot1v ports 1-2
Command: show port dot1v ports 1-2
Port : 1
Protocol Group ID VLAN Name Protocol Priority
----------------- ---------------- -----------------
1 default -
2 vlan_2 -
3 vlan_3 -
4 vlan_4 -
Port : 2
Protocol Group ID VLAN Name Protocol Priority
----------------- ------------ -----------------
1 vlan_2 -
2 vlan_3 -
3 vlan_4 -
4 vlan_5 -
Total Entries: 2
DAS-3626:admin#
enable pvid auto_assign
Purpose Enable/disable auto assignment of pvid.
Syntax enable|disable pvid auto_assign
Description The command enables the auto-assign of PVID.
If “auto-assign PVID” is disabled, PVID only be changed by PVID configuration (user changes
explicitly). The VLAN configuration will not automatically change PVID.
If “Auto-assign PVID” is enabled, PVID will be possibly changed by PVID or VLAN
configuration. When user configures a port to VLAN
X ’s untagged membership, this port’s
PVID will be updated with VLAN X. In the form of VLAN list command, PVID is updated with
last item of VLAN list. When user removes a port from the untagged membership of the
PVID’s VLAN, the port’s PVID will be assigned with “default VLAN”.
The default setting is enabled.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable the auto-assign PVID:
DAS-3626:admin#enable pvid auto_assign
Command: enable pvid auto_assign
Success.
DAS-3626:admin#
147