D-Link DAS-3636, Cli Reference Manual

Page: 367 / 480

DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
config authen_enable
Parameters default – The default method list for administration rights authentication, as defined by the
user. The user may choose one or a combination of up to four (4) of the following
authentication methods:
•
tacacs – Adding this parameter will require the user to be authenticated using the
TACACS protocol from the remote TACACS server hosts of the TACACS server
group list.
•
xtacacs – Adding this parameter will require the user to be authenticated using the
XTACACS protocol from the remote XTACACS server hosts of the XTACACS server
group list.
•
– Adding this parameter will require the user to be authenticated using the
protocol from the remote server hosts of the server
group list.
•
radius – Adding this parameter will require the user to be authenticated using the
RADIUS protocol from the remote RADIUS server hosts of the RADIUS server group
list.
•
server_group <string 15>
−
Adding this parameter will require the user to be
authenticated using a user-defined server group previously configured on the Switch.
•
local_enable
−
Adding this parameter will require the user to be authenticated using
the local user account database on the Switch.
•
none – Adding this parameter will require no authentication to access the Switch.
method_list_name – Enter a previously implemented method list name defined by the user
( create authen_enable ). The user may add one, or a combination of up to four (4) of the
following authentication methods to this method list:
•
tacacs – Adding this parameter will require the user to be authenticated using the
TACACS protocol from a remote TACACS server.
•
xtacacs – Adding this parameter will require the user to be authenticated using the
XTACACS protocol from a remote XTACACS server.
•
– Adding this parameter will require the user to be authenticated using the
protocol from a remote server.
•
radius
−
Adding this parameter will require the user to be authenticated using the
RADIUS protocol from a remote RADIUS server.
•
server_group <string 15>
−
Adding this parameter will require the user to be
authenticated using a user-defined server group previously configured on the Switch.
•
local_enable
−
Adding this parameter will require the user to be authenticated using
the local user account database on the Switch. The local enable password of the
device can be configured using the “ config admin local_password ” command.
•
none – Adding this parameter will require no authentication to access the
administration level privileges on the Switch.
Restrictions Only Administrator-level users can issue this command.
362