D-Link DAS-3636, Cli Reference Manual

Page: 143 / 480

DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Example usage:
To remove the VLAN “v1”:
DAS-3626:admin#delete vlan v1
Command: delete vlan v1
Success.
DAS-3626:admin#
delete vlan vlanid
Purpose Used to delete multiple VLANs by VLAN ID on the switch.
Syntax delete vlan vlanid <vidlist>
Description This command is used to delete previously configured multiple VLANs on the switch.
Parameters
<vidlist>
−
Specifies a range of multiple VLAN IDs to be deleted.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To delete VLAN ID on the switch:
DAS-3626:admin#delete vlan vlanid 5
Command: delete vlan vlanid 5
Success
DAS-3626:admin#
config vlan
Purpose Used to add additional ports to a previously configured VLAN.
Syntax config vlan <vlan_name 32> { [ add [ tagged | untagged | forbidden ] | delete ] <portlist>
| advertisement [ enable | disable]}
Description This command allows the user to add ports to the port list of a previously configured VLAN.
The user can specify the additional ports as tagging, untagging, or forbidden. The default is to
assign the ports as untagging.
Parameters
<vlan_name 32>
−
The name of the VLAN to which to add ports.
add
−
Entering the add parameter will add ports to the VLAN. There are three types of ports
to add:
•
tagged
−
Specifies the additional ports as tagged.
•
untagged
−
Specifies the additional ports as untagged.
•
forbidden
−
Specifies the additional ports as forbidden.
delete
−
Deletes ports from the specified VLAN.
<portlist>
−
A port or range of ports to add to, or delete from the specified VLAN.
advertisement [enable | disable]
−
Enables or disables GVRP on the specified VLAN.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To add 4 through 8 as tagged ports to the VLAN v1:
138