D-Link DAS-3636, Cli Reference Manual

Page: 273 / 480

DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
show cfm linktrace
Purpose Used to show linktrace responses.
Syntax show cfm linktrace [mepname <string 32> | mepid <int 1-8191> md <string 22> ma
<string 22>] {trans_id <uint>}
Description The maximum linktrace responses a device can hold is 64.
Parameters <macaddr> – Specifies the destination MAC address.
mepname – Specifies the MEP name.
mepid – MEP MEPID.
md – Specifies the maintenance domain name.
ma – Specifies the maintenance association name.
trans_id – Specifies the identifier of the transaction to show.
Restrictions None.
Example usage:
To display the CFM linktrace:
DAS-3626:admin#show cfm linktrace mepname 3 trans_id 1
Command: show cfm linktrace mepname 3 trans_id 1
Transaction ID: 1
From MEP 3 to 00-50-BA-50-11-51
Start Time : 2009-08-11 03:18:15
MAC Address Last Egress ID Reply Ingress MAC Port Action
Hop Relay Forwarded Next Egress ID Reply Egress MAC Port Action
--- ----- ----------------- ----------------- ----------------- ---- --------
1 FDB 00-80-C8-37-18-F1 00-80-C8-37-18-F0 - - -
Yes 00-80-C8-37-18-F0 00-80-C8-37-18-F1 1 Ok
2 Hit 00-50-BA-50-11-51 00-80-C8-37-18-F0 00-50-BA-50-11-51 wan Ok
No - - - -
DAS-3626:admin#
delete cfm linktrace
Purpose This command is used to delete received linktrace responses.
Syntax delete cfm linktrace {[md <string 22> {ma <string 22> {mepid <int 1-8191>}} | mepname
<string 32>]}
Description This command deletes the stored link trace response data that is initiated by the specified
MEP.
Parameters mepname – Specifies the MEP name.
mepid – Specifies the MEP MEPID.
md – Specifies the maintenance domain name.
ma – Specifies the maintenance association name.
Restrictions None.
268