D-Link DAS-3636 Page 192 Cli Reference Manual Download | Manualshive

Page: 192 / 480

background image

DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual

Example usage:

To display the MLD multicast VLAN group profile:

DAS-3626:admin#show mld_snooping multicast_vlan_group_profile
Command: show mld_snooping multicast_vlan_group_profile

Profile Name Multicast Addresses
-------------------------------- -------------------------------
g1 FF12::1-FF12::2

Total Entry: 1

DAS-3626:admin#

config mld_snooping multicast_vlan multicast_group

Purpose

Used to configure the multicast group which will be learned with the specific MLD multicast
VLAN.

Syntax

config mld_snooping multicast_vlan_group <vlan_name 32> [add | delete]
profile_name <profile_name 1-32>

Description

When a MLD packet is received, first, it will be checked whether to be processed by MLD
snooping. If MLD snooping for the classified VLAN of this MLD packet is enabled, it will be
processed, based on the MLD snooping function. If the MLD snooping for the classified VLAN
of this MLD packet is disabled, then it will check whether to be processed by the MLD
multicast VLAN function.
There are some cases when an MLD packet can be processed by the MLD multicast VLAN.
If there are no profiles system wide, and there is only one MLD multicast VLAN, then this
MLD packet will be associated with only this MLD multicast VLAN.
However if the packet is a tagged packet, the packet will be matched against the profile on
this VLAN. If matched, the packet will be associated with this VLAN. Otherwise, the packet is
an unmatched packet.
Otherwise if the packet is an untagged packet, the packet will be matched against profiles on
all MLD multicast VLANs. If it matches profiles on one of the MLD multicast VLANs, the
packets will be associated with this VLAN. If it does not match profiles on any VLANs, then
the packet is an umatched packet.
If the packet is an unmatched packet, it will not be processed by the MLD Multicast VLAN.
Instead, it will be processed based on the forwarding mode for unmatched packets and the
classified VLAN of this packet.

Note:

The same profile can not be overlapped in different multicast VLANs if these multicast

VLANs have an overlapping portlist. Multiple profiles can be added to a multicast VLAN.

Parameters

<vlan_name 32>

−

The name of the multicast VLAN to be configured, each multicast VLAN is

given a name that can be up to 32 characters.

add

−

Used to associate a profile to a multicast VLAN.

delete

−

Used to de-associate a profile from a multicast VLAN.

<profile_name 32>

−

The name of the MLD multicast VLAN group profile to be associated or

de- associated to the specified multicast VLAN.

Restrictions

Only Administrator and Operator-level users can issue this command.

187

«
...
190
191
192
193
194
...
»

Summary of Contents for DAS-3636

































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DAS-3636

Brand: Fema Pages: 96

DES-3224 - Switch

Brand: D-Link Pages: 75

Brand: Danfoss Pages: 6

Brand: CZHOON Pages: 4

Brand: Siqura Pages: 2

Brand: UfiSpace Pages: 25

Brand: Equip Pages: 10

Brand: A-Neuvideo Pages: 16

Brand: Black Box Pages: 9

TEG-S50TXE SHEETS

Brand: TRENDnet Pages: 20

Brand: PRO SIGNAL Pages: 2

Brand: Moxa Technologies Pages: 7

Brand: TRENDnet Pages: 2

Brand: EtherWAN Pages: 2

Brand: EtherWAN Pages: 2

Brand: JetNet Pages: 20

Brand: Maipu Pages: 135

Brand: LINK-MI Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands