D-Link DAS-3636, Cli Reference Manual

Page: 286 / 480

DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
DAS-3626:admin#config 802.1p user_priority 1 3
Command: config 802.1p user_priority 1 3
Success.
DAS-3626:admin#
show 802.1p user_priority
Purpose Used to display the current mapping between an incoming packet’s 802.1p priority value and
one of the Switch’s eight hardware priority queues.
Syntax show 802.1p user_priority
Description This command is used to display the current mapping of an incoming packet’s 802.1p priority
value to one of the Switch’s eight hardware priority queues.
Parameters None.
Restrictions None.
Example usage:
To show 802.1p user priority:
DAS-3626:admin#show 802.1p user_priority
Command: show 802.1p user_priority
QOS Class of Traffic
Priority-0 -> <Class-2>
Priority-1 -> <Class-0>
Priority-2 -> <Class-1>
Priority-3 -> <Class-3>
Priority-4 -> <Class-4>
Priority-5 -> <Class-5>
Priority-6 -> <Class-6>
Priority-7 -> <Class-7>
DAS-3626:admin#
config 802.1p default_priority
Purpose Used to configure the 802.1p default priority settings on the Switch. If an untagged packet is
received by the Switch, the priority configured with this command will be written to the
packet’s priority field.
Syntax config 802.1p default_priority [<portlist> | all] <priority 0-7>
Description This command allows the user to specify default priority handling of untagged packets
received by the Switch. The priority value entered with this command will be used to
determine which of the eight hardware priority queues the packet is forwarded to.
Parameters
<portlist>
−
Specifies a port or range of ports to be configured.
all
−
Specifies that the command applies to all ports on the Switch.
<priority 0-7>
−
The priority value to assign to untagged packets received by the Switch or a
range of ports on the Switch.
Restrictions Only Administrator and Operator-level users can issue this command.
281