manualshive.com logo in svg

D-Link DAS-3636, Cli Reference Manual

The D-Link DAS-3636 is a versatile networking device designed for seamless connectivity. Maximize your usage with the comprehensive "Cli Reference Manual," available for free download at manualshive.com. This essential manual provides step-by-step instructions, ensuring you make the most of your DAS-3636 and its technologically advanced features.

Share
Download
background image

DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual

create access_profile

Parameters

profile_id <value 1-1024>

 

−

 Sets the relative priority for the profile. Priority is set relative to 

other profiles where the lowest profile ID has the highest priority. The user may enter a 
profile ID number between 1 - 1024, yet, remember only 1024 access profiles can be 
created on the Switch.

profile_name <name 1-32>

 

−

 Specifies the name of the profile.  The maximum length is 32 

characters.

ethernet

 

−

 Specifies that the Switch will examine the layer 2 part of each packet header.

•

vlan

 

−

 Specifies that the Switch will examine the VLAN part of each packet 

header. 

source_mac <macmask 000000000000-ffffffffffff > 

−

 Specifies a MAC address mask for the 

source MAC address. This mask is entered in a hexadecimal format.

•

destination_mac <macmask 000000000000-ffffffffffff

 

>

 

−

 Specifies a MAC 

address mask for the destination MAC address. 

•

802.1p 

−

 Specifies that the Switch will examine the 802.1p priority value in the 

frame’s header.

ethernet_type 

−

 Specifies that the Switch will examine the Ethernet type value in each 

frame’s header.

Ipv4

 

−

 Specifies that the Switch will examine the IP address in each frame’s header.

vlan

 

−

 Specifies a VLAN mask. 

source_ip_mask <netmask>

 

−

 Specifies an IP address mask for the source IP address. 

destination_ip_mask <netmask>

 

−

 Specifies an IP address mask for the destination IP 

address. 

dscp

 

−

 Specifies that the Switch will examine the DiffServ Code Point (DSCP) field in each 

frame’s header. 

icmp

 

−

 Specifies that the Switch will examine the Internet Control Message Protocol (ICMP) 

field in each frame’s header. 

type 

−

 Specifies that the Switch will examine each frame’s ICMP Type field. 

code 

 

−

 Specifies that the Switch will examine each frame’s ICMP Code field. 

igmp 

−

 Specifies that the Switch will examine each frame’s Internet Group Management 

Protocol (IGMP) field. 

type 

−

 Specifies that the Switch will examine each frame’s IGMP Type field.

tcp 

– Specifies that the Switch will examine each frame’s Transmission Control Protocol 

(TCP) field.

src_port_mask <hex 0x0-0xffff>

 

−

 Specifies a TCP port mask for the source port.

dst_port_mask <hex 0x0-0xffff>

 

−

 Specifies a TCP port mask for the destination port. 

flag_mask 

– Enter the appropriate flag_mask parameter. All incoming packets have TCP 

port numbers contained in them as the forwarding criterion. These numbers have flag 
bits associated with them which are parts of a packet that determine what to do with the 
packet. The user may deny packets by denying certain flag bits within the packets. The 
user may choose between 

all, urg 

(urgent), 

ack 

(acknowledgement), 

psh

 (push), 

rst 

(reset),

 syn

 (synchronize) and 

fin 

(finish).

udp

 

−

 Specifies that the Switch will examine each frame’s User Datagram Protocol (UDP) 

field. 

src_port_mask <hex 0x0-0xffff>

 

−

 Specifies a UDP port mask for the source port. 

dst_port_mask <hex 0x0-0xffff>

 

−

 Specifies a UDP port mask for the destination port.

protocol_id <value 0-255>

 

−

 Specifies that the Switch will examine the protocol field in each 

packet and if this field contains the value entered here, apply the following rules.

user_define_mask <hex 0x0-0xffffffff>

 

−

 Specifies that the rule applies to the IP protocol ID 

and the mask options behind the IP header.  

packet_content_mask 

– Allows users to examine up to 4 specified offset_chunk within a 

packet at one time and specifies that the Switch will mask the packet header beginning 
with the offset value specified as follows:

399

Summary of Contents for DAS-3636

































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DAS-3636

CALIENT S320 Hardware User'S Manual preview
S320
Brand: CALIENT Pages: 46
CALIENT S320 Getting Started Manual preview
S320
Brand: CALIENT Pages: 42
JDS Uniphase SCG Series User Manual preview
SCG Series
Brand: JDS Uniphase Pages: 37
Radial Engineering Gold Digger User Manual preview
Gold Digger
Brand: Radial Engineering Pages: 8
Radial Engineering BigShot ABY User Manual preview
BigShot ABY
Brand: Radial Engineering Pages: 2
SIMON RWA HE 083 Brief Instruction preview
HE 083
Brand: SIMON RWA Pages: 3
Aeon Labs Aeotec Micro Smart Energy Switch G2 Manual preview
Aeotec Micro Smart Energy Switch G2
Brand: Aeon Labs Pages: 11
Witura WT-1672D User Manual preview
WT-1672D
Brand: Witura Pages: 21
Gilat SkyEdge II-c Capricorn Pro 4 AC Series Installation Notes preview
SkyEdge II-c Capricorn Pro 4 AC Series
Brand: Gilat Pages: 2
Waters Network Systems ES1008-MSC Operating Manual preview
ES1008-MSC
Brand: Waters Network Systems Pages: 16
AVE 8PSWT Specification preview
8PSWT
Brand: AVE Pages: 2
Ruby Tech GS-5124C Technical Specifications preview
GS-5124C
Brand: Ruby Tech Pages: 2
NTI UNIMUX-nXm-UHD Installation And Operation Manual preview
UNIMUX-nXm-UHD
Brand: NTI Pages: 69
Cabletron Systems SEHI SEHI100TX- User Manual preview
SEHI SEHI100TX-
Brand: Cabletron Systems Pages: 75
Eaton ATR Series Instruction Leaflet preview
ATR Series
Brand: Eaton Pages: 2
Optex OAM-DUAL T Operation Manual preview
OAM-DUAL T
Brand: Optex Pages: 2
Hall Research Technologies KVMC-UH-8 User Manual preview
KVMC-UH-8
Brand: Hall Research Technologies Pages: 9
Black Box SW614A User Manual preview
SW614A
Brand: Black Box Pages: 57

Brands by name

Popular brands

Load more brands