D-Link DAS-3636, Cli Reference Manual

Page: 82 / 480

DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
show arpentry
Purpose Used to display the ARP table.
Syntax show arpentry {ipif <ipif_name 12> | ipaddress <ipaddr> | static }
Description This command is used to display the current contents of the Switch’s ARP table.
Parameters ipif <ipif_name 12>
−
The name of the IP interface the end node or station for which the ARP
table entry was made, resides on.
ipaddress <ipaddr>
−
The network address corresponding to the IP interface name above.
static – Displays the static entries to the ARP table.
Restrictions None.
Example usage:
To display the ARP table :
DAS-3626:admin#show arpentry
Command: show arpentry
ARP Aging Time : 20
Interface IP Address MAC Address Type
------------- --------------- ----------------- ---------------
System 10.0.0.0 FF-FF-FF-FF-FF-FF Local/Broadcast
System 10.24.73.21 00-01-02-03-04-00 Local
System 10.48.74.121 00-50-BA-00-07-36 Static
System 10.255.255.255 FF-FF-FF-FF-FF-FF Local/Broadcast
Total Entries: 4
DAS-3626:admin#
clear arptable
Purpose Used to remove all dynamic ARP table entries.
Syntax clear arptable
Description This command is used to remove dynamic ARP table entries from the Switch’s ARP table.
Static ARP table entries are not affected.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To remove dynamic entries in the ARP table:
DAS-3626:admin#clear arptable
Command: clear arptable
Success.
DAS-3626:admin#
77