D-Link DAS-3636, Cli Reference Manual

Page: 386 / 480

DAS-3600 Series Ethernet over VDSL Switch CLI Reference Manual
Example usage:
To view authentication server groups currently set on the Switch.
DAS-3626:admin#show authen server_group
Command: show authen server_group
Server Group : mix_1
Group Name IP Address Protocol
--------------- -------------- --------
mix_1 10.1.1.222
10.1.1.223 TACACS
radius 10.1.1.224 RADIUS
tacacs 10.1.1.225 TACACS
10.1.1.226
xtacacs 10.1.1.227 XTACACS
Total Entries : 5
DAS-3626:admin#
config authen parameter response_timeout
Purpose Used to configure the amount of time the Switch will wait for a user to enter authentication
before timing out.
Syntax config authen parameter response_timeout <int 0-255>
Description This command will set the time the Switch will wait for a response of authentication from the
user.
Parameters
response_timeout <int 0-255>
−
Set the time, in seconds, the Switch will wait for a response
of authentication from the user attempting to log in from the command line interface or telnet
interface. Zero means there won’t be a time-out. The default value is
0 seconds.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure the response timeout for 60 seconds:
DAS-3626:admin# config authen parameter response_timeout 60
Command: config authen parameter response_timeout 60
Success.
DAS-3626:admin#
config authen parameter attempt
Purpose Used to configure the maximum number of times the Switch will accept authentication
attempts.
Syntax config authen parameter attempt <int 1-255>
Description This command will configure the maximum number of times the Switch will accept
authentication attempts. Users failing to be authenticated after the set amount of attempts will
be denied access to the Switch and will be locked out of further authentication attempts.
Command line interface users will have to wait 60 seconds before another authentication
attempt. Telnet users will be disconnected from the Switch.
Parameters
parameter attempt <int 1-255>
−
Set the maximum number of attempts the user may try to
become authenticated by the Switch, before being locked out. The default setting is 3.
Restrictions Only Administrator-level users can issue this command.
381