manualshive.com logo in svg

D-Link 3010F - DES Switch, Web User Manual, Page: 51 / 281

Share
Download
D-Link 3010F - DES Switch Web User Manual Download Page 51

D-Link DES-3010FA/GA User Guide

Page 50 

Starting the D-Link Embedded Web Interface 

This section contains information on starting the D-Link Embedded Web interface. To access the D-Link user 
interface:

1.

Open an Internet browser.

2.

Ensure that pop-up blockers are disabled. If pop-up blockers are enable, edit, add, and device information 
messages may not open. 

3.

Enter the device IP address in the address bar and press 

<Enter>

. The

 Enter Network Password Page

 

opens:

Figure 15: Enter Network Password Page

4.

Enter your user name and password. 

Notes

•

The device is configured with a user name that is admin and a password that is blank, and can be 
configured without entering a password.

•

Passwords are case sensitive.

•

To operate the device, disable all pop-ups with a popup blocker.

5.

Click . 

The 

D-Link Embedded Web Interface Home Page

 opens:

Summary of Contents for 3010F - DES Switch


























































































































































































































































































Reviews:

No comments