D-Link 3010F - DES Switch Web User Manual Download

Page: 203 / 281

D-Link DES-3010FA/GA User Guide

Page 202

–

Notice

— Provides device information.

–

Informational

— Provides device information.

–

Debug

— Provides debugging messages.

Note

When a severity level is selected, all severity level choices above the selection are selected automatically.

–

Console

— Defines the minimum severity level from which logs are sent to the console.

–

RAM Logs

— Defines the minimum severity level from which logs are sent to the RAM Log kept in RAM

(Cache).

–

Log File

— Defines the minimum severity level from which logs are sent to the log file kept in FLASH

memory.

Define the

Logging

Enable

, and

Severity

fields.

Click.

The global log parameters are set, and the device is updated.

Summary of Contents for 3010F - DES Switch


























































































































































































































































































Search results

Summary of Contents for 3010F - DES Switch

Reviews:

Related manuals for 3010F - DES Switch

Brands by name

Popular brands

D-Link 3010F - DES Switch, Web User Manual

Search results

Summary of Contents for 3010F - DES Switch

Reviews:

Related manuals for 3010F - DES Switch

Brands by name

Popular brands